2Pack Solar Security Lights Outdoor 1100LM LED Motion Sensor IP65 Waterproof

Description

BetterChoice,BetterExperience.
The AmeriTop Solar Motion Sensor Light is brighter than other similar solar lights, has lasting and consistent in a good performance.
By choosing our product, you will have a uniquely wonderful experience. Its outstanding quality standards provide efficient lighting and add extra safety to your house.
Our solar security light with the three heads design, equipped with 300 super bright LED beads, produces up to 2200LM 7000K high brightness output and good heat dissipation.
The conversion rate of our upgraded polycrystalline silicon solar panels is as high as 20%. Incredible photocell efficiency, also working great in winter.
2 Available Modes:
Sensor Mode- Automatically turns off during the day and will only turn on when it senses movement at night. The light will turn off after 30 seconds of no movement. If people stay active in the sensor area the bright light mode will remain on.
OFF Mode- OFF Mode is also available if you want it to rest for a short time.
Specification:
Color Temperature: 7000K(White Light)
Lumen:2200
Lighting Angle: 270 degrees
Detection Range: 180 degrees
Sensing Distance: 16- 26Ft
Battery: 18650 - 2200mAh 3.7V rechargeable lithium-ion battery(Build-in)
Motion Sensor Mode:
It will be entered into Motion Sensor Mode by pressing the button at the first time. The brightness will stay for 3 seconds by mode indication.
The light won't turn on if it is daytime. When motion is detected, the light illuminates at full brightness for approximately 30 seconds at night.
Dim light/Motion Sensor Mode:
It will be entered into Dim light/Motion Sensor Mode by pressing the button at the second time. Under this mode, the light illuminates automatically at dusk using an energy saving mode of 20lm of low brightness. When motion is detected, the light illuminates at full brightness for approximately
30 seconds. When movement detection ceases, the light will revert back to the low brightness energy saveing mode.
Permanent On mode:
Under this mode, the brightness will stay for 3 seconds by mode indication. The light won't turn on if it is daytime. It will be entered into the ermanent On Mode for 4 hours at night. (The movement detection is ceased during 4 hours) After 4 hours, when motion is detected, the light illuminates at full brightness for approximately 30 seconds.
Installation:
Fix the pillar hinge into the wall.
Press the button switch to turn on the light.
Place the screw hole of the light over the pillar hinge.
Put the screw through the lamp and twist it into the pillar hinge.
Corridor
Garage
Backyard
Gates